Author Topic: Port problem (Read 1032 times)

rukyse · « **on:** June 19, 2006, 02:09:23 pm »

I can't find my router model at the site below to set my TCP & UDP for WinMx
www.portforwarding.com

they only got
Aztech - DSL600ER

but mine is
Aztech - DSL600EU

Which site got "port forwarding (WinMx) for Aztech - DSL600ER"???

forgive my poor english.....again...

rukyse · « **Reply #1 on:** June 19, 2006, 02:12:12 pm »

sorry

is www.portforward.com

KM · « **Reply #2 on:** June 19, 2006, 02:20:14 pm »

a similar model will probably be the same instructions, most routers it is the same process just that the pages look slightly different - if it is a similar model then the pages will probably even look the same

rukyse · « **Reply #3 on:** June 19, 2006, 03:23:40 pm »

but after the "similar" setting
WinMx still "No UDP port for incoming and outgoing packets"

what is incoming and outgoing packets?

thanks for reply~^^

KM · « **Reply #4 on:** June 19, 2006, 06:30:36 pm »

that means you have not set it within winmx, if you go to settings in winmx and select in/out UDP packets then change it from "unable to.." to a specific port (the same one you forwarded for UDP in your router - probably 6257?)