Author Topic: finally!!! (Read 1474 times)

frbrd13004 · « **on:** October 13, 2005, 12:29:58 am »

ip adress was changed, somehow, put in right ip loaded mx 3.53 with dll, mxmon, sherwood and success. running smooth as silk for now one can only hope.

Me Here · « **Reply #1 on:** October 13, 2005, 12:35:10 am »

frbrd13004 · « **Reply #2 on:** October 13, 2005, 02:09:00 am »

been over an hour now and still going strong. 5+ primaries and 10+ secondaries. uploads/downloads flying by. sherwood doing it's job keeping flooders off of me. seem to have lots of bandwidth, think i might give it more to see what happens. will keep connection up as long as it takes.
if anyone needs info regarding what i did to get going let me know will help all i can
will keep you posted on how i'm hanging in. hope every one has as much luck as i did.

Me Here · « **Reply #3 on:** October 13, 2005, 04:19:56 am »

I hope you keep going also, and yes if you get time I would love for you to post what you did to get things right for you..

Sometimes another perspective works wonders to help folks...

Goon Squad · « **Reply #4 on:** October 13, 2005, 04:28:29 am »

Finally got mine working also.

I haved missed WinMX

frbrd13004 · « **Reply #5 on:** October 13, 2005, 11:06:58 pm »

been 24+ hrs now and still doing great. it took me awhile to get it working but sherwood is well worth the effort. i'm maintaining a steady bandwidth wich allows my uploads and downloads to remain constant, LOVE IT!!
As far as getting MX up and running, it took some trial and error, I learned a few things that were'nt apparent to begin with.
First, I deleted MX, Sherwood and all related software.
Second, I discover that if you use Norton Internet Security you must check what ports are being filtered. Apparently NIS blocks Sherwood and MX when running together, so I removed my tcp/upd ports from the filter list.
Next, I learned that with my router (Lynksys) that I had to set my static IP, this was neccessary for Sherwood to function properly, also I had to enable the WAN function.
Finally, I reinstalled MX3.53 and placed the Ws-32dll file in the same folder with MX, as per instructions, then I reinstalled Sherwood, put in my tcp port number, sarted Sherwood then MX,MXmon,PG2 inthat order and viola! within a minute I had connected with 5 primaries and seven secondaries. After a few more minutes those numbers rose,compared to previous results, quite substancely, 10 primaries and 14 secondaries. Sherwood was blocking flooders like crazy along with PG2 and has been doing so for over 24 hrs now.
All my MX functions work flawlessly and I am now a very happy camper.
OS XP home addition
Linksys router
Speedstream Dsl modem
If there is anything I probably left out that anyone needs or would like to know, just ask and i will do my best to explain.

frbrd13004 · « **Reply #6 on:** October 13, 2005, 11:13:20 pm »

I forgot to give some very important info.
After deleting MX,Sherwood and all related software I also flushed my dns cache(very important).
Like I said previously I figured this out through trial and error and shear determenation to get my MX BACK.