my scripts with %PARAM% in them arent working any more

[Erica]

My metis bot was working fine then it crashed and i had to make a new one. I put the exact same scripts that i used before in it and the ones with %PARAM% in them aren't working anymore. Like !flirt %PARAM% or !slap %PARAM%. here are some of the scripts

Code: [Select]

<command type="random">
<in>!flirt %PARAMETER%</in>
<out> %NAME% #c11#runs their finger up and down %PARAM%'s #c11#arm </out>
<out> %NAME% #c11#gives %PARAM%  #c11#butterfly kisses </out>
<out> %NAME% #c11#grabs %PARAM%'s #c11#butt </out>
<out> %NAME% #c11#gives %PARAM% #c11#a single red rose </out>
<out> %NAME% #c11#rests their head on %PARAM%'s #c11#sholder </out>
<out> %NAME% #c11#gives %PARAM% #c11#a back rub </out>
<out> %NAME% #c11#winks at %PARAM% </out>
<out> %NAME% #c11#nibbles on %PARAM%'s #c11#ear </out>
<out> %NAME% #c11#blows %PARAM% #c11#a kiss </out>
<out> %NAME% #c11#plays footsies with %PARAM% </out>
<out> %NAME% #c11#gives %PARAM% #c11#a more than just friendly hug </out>
<out> %NAME% #c11#runs their fingers through %PARAM%'s #c11#hair </out>
</command>

<command type="script">
<in>!tuck %PARAM%</in>
<out>#c8#%NAME% #c15#fluffs #c16#%PARAM%'s #c15#pillow,</out>
<out>#c15#and tucks #c16#%PARAM% #c15#in gently.</out>
<out>#c8#%NAME% #c27#reads #c16#%PARAM% #c27#a bedtime story.</out>
<out>#c8#%NAME% #c7#checks #c16#%PARAM%'s #c7#closet for scary monsters and turns out the light.</out>
<out>#c33#SLEEP WELL #c16#%PARAM% #c33#!</out>
</command>


<command type="script">
<in>!untuck %PARAM%</in>
<out>#c15#%NAME% #c27#yanks the covers off of #c15#%PARAM%#c27#,</out>
<out>#c33#grabs a pan and spoon and bangs them over #c15#%PARAM%'s #c33#head.</out>
<out>#c16#WAKEY WAKEY #c15#%PARAM%! #c16#Rise and shine!</out>
<out>#c7#(#c15#%NAME% #c7#runs out of the room before #c15#%PARAM% #c7#can throw the pan at them. o.O)</out>
</command>


<command>
<in>!hug %PARAM%</in>
<out>%NAME% #c33#gives #c18#%PARAM% #c33#a huge hug  #c10#((((((( #c18#%PARAM% #c10#)))))))  #c33#awwww so much love in this room #c7#:#c17#)</out>
</command>

please help if u can, thanks!

*Erica*


[Edited by Mr.Snicky for code tags]

[Mr.Snicky]

Try this.

Code: [Select]


<command type="script">
<in>!tuck %PARAM%</in>
<out type="push" extdata="tuck">%PARAM%</out>
<out>#c8#%NAME% #c15#fluffs #c16#$tuck$'s #c15#pillow,</out>
<out>#c15#and tucks #c16#$tuck$ #c15#in gently.</out>
<out>#c8#%NAME% #c27#reads #c16#$tuck$ #c27#a bedtime story.</out>
<out>#c8#%NAME% #c7#checks #c16#$tuck$'s #c7#closet for scary monsters and turns out the light.</out>
<out>#c33#SLEEP WELL #c16#$tuck$ #c33#!</out>
</command>

Don't know if that'll work but may be worth a try.

[Erica]

ya thanks but didnt work

[Joshua203]

Hi erica does it help if you replace all param with parameter ??

both should work but who knows

[Joshua203]

i see you used them both at the same time here

Code: [Select]

<in>!flirt %PARAMETER%</in>
<out> %NAME% #c11#runs their finger up and down %PARAM%'s #c11#arm </out>
maybe that is the cause, just guessing

[wonderer]

And your robomx version and metis version are?
Robomx version, look in robomx/help/ about
Metis version, look in robomx/view/plugins