Author Topic: plusmx wont connect (Read 3668 times)

zabba · « **on:** September 07, 2009, 06:31:42 am »

Help: ive have tryed 1.9, 1.7, 1.4, 1.8, of plusmx copied patch to all & still wont connect..
Any help will b wonderful THx

wonderer · « **Reply #1 on:** September 07, 2009, 08:03:45 am »

PlusMX is a plugin for WinMx 3.53-3.54 and won't work stand alone

Joshua203 · « **Reply #2 on:** September 07, 2009, 09:51:49 am »

hi there,

if you install plusmx and place the oledlg.dll and oledlg.ini from the comunity patch in the folders mx-1 >>mx10 it should connect just fine zabba

Joshua203 · « **Reply #3 on:** September 07, 2009, 10:30:45 am »

and if you allready have done what i said in the previous post and it still does not connect the keep in mind that it uses there ports by default that may need to be opened or allowed through firewall and router

TCP:
MX1: 6688
MX2: 16699
MX3: 16698
MX4: 16697
MX5: 16696
MX6: 16695
MX7: 16694
MX9: 16693
MX8: 16692
MX10: 16691

UDP:
MX1: 6240
MX2: 16257
MX3: 16256
MX4: 16255
MX5: 16254
MX6: 16253
MX7: 16252
MX8: 16251
MX9: 16250
MX10: 16249

i hope this helped a little

~~birdman~~ · « **Reply #4 on:** September 07, 2009, 04:33:20 pm »

ive never heard of plusmx what is it and where can it be found ?

Stevi · « **Reply #5 on:** September 07, 2009, 05:18:42 pm »

PlusMX is a program made by Emulator that allows multiple WinMXs open at one time. You can find it http://www.emuware.org/?p=view&type=0&id=20

F£¥è® · « **Reply #6 on:** September 07, 2009, 05:19:19 pm »

plusmx is written by Emulator it's in the archives here, or the latest version can be d/loaded from his web site

http://www.emuware.org/?p=view&type=0&id=20

F£¥è® · « **Reply #7 on:** September 07, 2009, 05:21:48 pm »

sorry posted at the same time as Omega please delete the above post.

]2aven (R.I.P.) · « **Reply #8 on:** September 08, 2009, 01:01:06 am »

I might be mistaken but .. the last time I tried PlusMX it only connected properly with the "host file". Also, I don't recommend opening, what 20 or 22 different ports in your router / firewall as that might cause connection issues. I guess it depends on what you intend to use it for..

Max™ · « **Reply #9 on:** September 08, 2009, 09:01:07 am »

PlusMX will connect if you pop the ws2_32.dll in each plusmx folder, it connects fine, 1st 1 will connect primary, 2nd and so on connect secondary

Joshua203 · « **Reply #10 on:** September 08, 2009, 09:52:08 am »

because of all the different opinions on connecting this, i went back in and tested this, you don t need ws2_32 also hostfiled in not needed, ... oledlg.dll and oledlg.ini added in the 10 mx folders works just fine

the problem i encountered was that my protection keeps removing and deleting the startup exe this is probably because the "trick" that plusmx uses to start more than one is viewed as a hack by one or more protection software

maybe two old older posts i made on WMW could be helpfull so i ll quote them here:

Quote

plus mx has some downsides:

- you never know how many and wich ones will connect or crash trying to start up (it used to make me restart lots of times before i got exactly what i wanted, best way for me was ... want 4? ask for 8! and pray you get the ones you really want )
- make sure only one does the downloading or at least have them searching for their own incompletes (else you ll end up have something like eminem(1).mp3 and eminem.mp3 ... 2files ..1 song! downloaded by 2 different mx in one go!)
- having them all set to primary is obviously asking to crash ( i used 1 on primary in the past and the rest on sec)
- just one mx moni to monitor just one mx

on the positive side:

- it does actually do what you want
- it can be run with 3.54 (just replace the 3.53 with 3.54 before letting it set up shop)

Quote

the other way of doing this was a more stable on startups

this one allows you to run 4 mx3.31 ...good thing about this was you are allowed to handstart them one b one ..so you know exactly what you ll get

i think this version must be iin the archieves on here