Author Topic: no chat room list available (Read 1742 times)

Hotrod · « **on:** April 25, 2006, 01:41:26 pm »

Hi im having a problem viewing the chat room list , the results show over 1000 but none are displayed ....
i downloaded the 3.54 beta version ... at the top of the screen it says "currrently blocking flooders to protect the network " ... anyone help me please ????

Bearded Blunder · « **Reply #1 on:** April 25, 2006, 01:52:27 pm »

Make sure the filter box is empty so results display, if for instance you accidently have a row of spaces in there, it will filter all channels from the list window, while still showing (in my case) 1650 rooms at the bottom, next try right clicking the title bar at the top of winmx & picking "reset all windows" & if that fails try restarting winmx, asssuming none of that works, ask again, i'd suspect a port forwarding issue if it showed no results, but you say it's getting channels but not displaying them.

mmkool · « **Reply #2 on:** July 04, 2006, 08:02:09 pm »

not able to enter chat room,no channel list no annels listed. WINMX v 3.53. any suggestions?

Me Here · « **Reply #3 on:** July 04, 2006, 08:17:46 pm »

need to know if your on primary and do you have a router or modem that might need ports set up better?

Often if you do have these you can switch to secondary and get a room list ok.. then if you would like you can either look for you model of router or modem here

http://www.portforward.com/routers.htm
Look for your name and model, click it, then look for WinMX in the applications and click that.. then follow the directions..

Or if you like you can enter our help room by
Copy this room name, make sure you have no extra spaces at the end

WinMxWorld.com Help_E3D7EFD50D3D

put that into your filter bar.. then click join on the right..

Marty · « **Reply #4 on:** July 04, 2006, 08:51:31 pm »

i have tried both , primary & secondary. was in room last nite ,today nothing used portforwading for settings, wrong settings, had isp setup tcp & udp.