Question about OnTimer

[philippe49000]

On my room the OnTimer is on with an intervall 900 and i have a  message each 15 minutes . I would like to have a synchro with the time but i don't know how to make this ... Actually when the bot come on the room at 18h10 the first message come at 18:25 etc ... Is there a possility to have for example : when the bot enter on the room at 18h10 a synchro with the time to get the first message at 18h15 the second at 18h30 , 18:45... etc  each 15 minutes ? can you help me please ! thank you


[Edit by:Omega] Moved to the script help section. [/Edit]

[]-[êll.Ôñ.ËÀR'][']-[.]

just stop and restart the bot at any of these times and it will continue every 15 mins from there out

[philippe49000]

Ok it's a manual solution but in auto is it possible ?

[Micromecca]

You could add a trigger to start the timer at the required time, for example if you bring the bot in at 07.09 wait until 07.15 before starting it with !timeron for example

[philippe49000]

It's ok thank you for help !!! but I have made this and i have the OnTimer too   
With 2 files txt with a loop at the end to return to line timeron = 1

<OnJoinRoom type="script">
<out type="self">!starttimer</out>
<out>/opmsg Timer Démarré !</out>
</OnJoinRoom>

<command type="script" mode="thread">
<in>!starttimer</in>
<out>/opmsg Timer Démarré !</out>

<out type="push" extdata="timeron">1</out>

<out type="push" extdata="tot" condition="==" lvalue="%LOCALTIME%" rvalue="01:00.00" >%LOCALTIME%</out>
<out type="file" extdata="C:\Program Files\Metis 2.8-WCS\Plugins\Compteur\minutes.txt" mode="t">$tot$</out>
<out type="file" condition="==" lvalue="%LOCALTIME%" rvalue="01:00.00" extdata="C:\Program Files\Metis 2.8-WCS\Plugins\Compteur\Cpt.txt" mode="t">1</out>
<out type="push" extdata="record"><operator type="readfile" nvalue="C:\Program Files\Metis 2.8-WCS\Plugins\Compteur\Cpt.txt" lvalue="l" rvalue="1"/></out>
<out condition="==" lvalue="$record$" rvalue="1">Les Informations en live toutes les heures sur : #c16#FRANCE 2  #c8#</out>
<out type="file" extdata="C:\Program Files\Metis 2.8-WCS\Plugins\Compteur\Cpt.txt" mode="t">0</out>
<out type="sleep" extdata="1000"></out>
<out type="goto" extdata="-8" condition="==" lvalue="$timeron$" rvalue="1"></out>
</command>

You can put severals messages for differents hours and some differents if you want with new lines and the rvalue to 2 or 3 etc ... Don't forget to adjust the goto ...

Philippe49000

FRANCE 2