Loading Incomplete Files Into Transfer Window

[goosemon]

I have more than 200 incomplete files (my wish list) in my download folder. When I start WinMX it only loads a small No. of these into the transfer window; making me load incomplete, and re-config "Auto Find Sources" and "Auto Enter Que". This is extremely time consuming and a major bother. Have version 3.54 beta 4 and don't recall having this problem with earlier versions. Is there a limit? and if so is it adjustable?

[]-[êll.Ôñ.ËÀR'][']-[.]

perhaps check your queue settings by going to settings at the top of your winmx then select the queuing tab and check your downloads are set high enough to allow for the files you are trying to get ....if this dosn't solve the problem then a re-install of winmx might cure it

a little tip to speed up Auto Find Sources and Auto Enter Queue .... once loaded incomplete hold down the ctrl key and left click on each file you want to set ....once they are all highlighted still holding down the ctrl key right click and use the Auto Find Sources .... then do the same for Auto Enter Queue ...this will speed up the process

[SamSeeSam]

Yes there is a imit of 50 incomplete files. Only fifty will be shown upon each restart of winmx ...
Revert to an old version if it's too cumbersome or you can do 50 files at a time...

Cheers

[Joshua203]

hi there,

once loaded incomplete hold down the ctrl key and left click on each file you want to set ....once they are all highlighted still holding down the ctrl key right click and use the Auto Find Sources .... then do the same for Auto Enter Queue ...this will speed up the process

Just wanted to let you know i do the same on mouse action only...what i do is press left mousebutton at the bottom of dload window ...keep it pressed while moving it to top list to select all files ... after that i do the same as Hell

hope this helped... Joshua203


**Edit: Fixed by MH