Author Topic: Lots of files in transfers window = freezes ? (Read 1846 times)

Bob · « **on:** July 18, 2010, 02:05:00 am »

I just added a bunch (over 1000) new files to download. Now when I start WinMX, it won't display all of them in the transfers window, so I use the "load incomplete" button. So far, so good. The problem starts when I try to select all those files and right-click on them for any simple operation such as setting AFS and AEQ. WinMX will freeze (white screen) for several minutes just to accept the given command, and sometimes won't recover from the freeze and I end up terminating the process.

Is this normal behaviour given the number of files ? Maybe a limitation in WinMX ? Or is it something else ?

I'm using XP SP3 with WinMX 3.54b4 and the community patch 1.0 , if that makes any difference.

Any help much appreciated.

Bob · « **Reply #1 on:** July 18, 2010, 02:11:30 am »

Note - I've already read the pertinent help section but nothing in there seems to apply to my problem: I'm on a secondary connection, only third party I use is MXMonitor but I completely disabled it and the problem persists, my GDI objects are only just above 100, and that M$ patch doesn't apply to SP3.

Joshua203 · « **Reply #2 on:** July 18, 2010, 02:26:40 am »

usually i ld say there should be no problem, but because you seem to have a problem ..have you tried doing this in a few smaller steps? just a thought

Bluey_412 · « **Reply #3 on:** July 18, 2010, 04:32:19 am »

why 1000 files in one hit?

even if you could get them all running at once, its gonna be incredibly slow...

if you set your default AFS and AEQ settings beforehand, they would all be right to go, altho AFS is not gonna visit each file real often, it does then one at a time...

but try selecting about 20 or 50 files each time, not all 1000

White Stripes · « **Reply #4 on:** July 18, 2010, 05:05:16 am »

at around 100+ more than what load automatically, you are pushing it, but it should still work... 'quick' way to auto-set all the AEQ-AFS is first; disconnect from the wpn in the networks tab, trust me on this, then go back to transfers left click the top file.. scroll to the bottom.. hold shift... and click the bottom file (this will select all files since ctrl+a does not work in the trasfers window) let go of shift and right click any of one of them and set AEQ-AFS and all will have the same settings ... a short.... or long... 'freeze' will occour between each set but winmx itself shouldnt crash (the disconnect is needed to make sure network traffic doesnt back up while doing this)... it will eat 100% cpu for quite a while (used to stick for around 5 to 10 mins depending on what kind of cpu i was using at the time doing this little trick) between setting those two... but it eventually works... once all files are set click 'connect' again... that behavior is normal...

note: make sure programs like mxmoni and leechammer are not running when re-loading/re-setting the files....

a good idea if you dont like doing that every time is once you have all your incompletes loaded and set the way you want is to leave winmx running.... when you dont want to download/upload go to the network tab and click 'disconnect' .. minimise the app and just leave it... when you want to start d/ling again restore it and click 'connect' ... tho this will leave the last few running transfers running till they either finish or break it wont start any new ones... ...if you need to shut down your computer another good way to keep from having to do that again is to enable xps 'hibernate' function and hibernate the computer rather than shut it down... the psu will switch off just like shutting down but windows and winmx will be waiting to pick back up where it left off...

Bob · « **Reply #5 on:** July 18, 2010, 10:00:45 am »

Thanks, guys... I guess it's "normal" then i.e. a WinMX limitation and there isn't much I can do.

I've been using WinMX for years and while I normally don't add thousands of files to the queue in one go (had a recent hard drive failure and lost a good portion of un-backed data, that's why...), there is no reason why I shouldn't be able to. I'm just queuing them for later download, not trying to download them all at the same time, that's why there are settings to control the number of simultaneous downloads and uploads... this is obviously just another design shortcoming showing WinMX's age and its interrupted developing/beta status... heh.

Thanks again.

Bluey_412 · « **Reply #6 on:** July 18, 2010, 11:53:41 am »

dont forget too, bob, winmx was always designed to run in the background, limits itself to 10% of your bandwidth...

hence some of the limitations, they are a design feature, not a flaw...