Author Topic: Metis (Read 21034 times)

°¹º-»ÐäZ«-º¹° · « **Reply #20 on:** July 21, 2005, 07:18:57 pm »

Thank u 4 helping me.

Yes i did admin the metis bot.

Sorry 2 sound very stupid but i copied n paisted that code in 2 the notpad 4 metis n replaced zenars name with mine. Then i brought a another bot in the room n flooded but it didnt get the boot!

Is there somethin im doin wrong or am i using the wrong tools 4 the job

GhostShip · « **Reply #21 on:** July 21, 2005, 08:53:53 pm »

Hmm I was just looking through the WCS tutorial, can you make sure none of your users are given any of these level settings,

Quote

N Can use #NEWLINE# for multi-line text
n Can use /notice to send public notices
F Can flood (allows more spamming, for sending lots of lines of text at once)

and did the bot give a warning or just do nothing ?

Oh one more thing to try, ask one of the regulars to test it , that will allow us to rule out one more item. (remember to unban them if it works )
Thanx in advance

Galactic Overlord · « **Reply #22 on:** July 21, 2005, 10:20:11 pm »

Zeus you can try this script that I use for WCS...and it does work..

###Flood Control###

Code: [Select]

<?xml version="1.0" standalone="no">
<config>

<command type="script" usergroup="!admins">
<in>*</in>
<out condition="==" lvalue=%TRIGGER% rvalue=%USERVAR[15]% type="push" extdata="16">%TRIGGER%</out>
<out type="push" extdata="15">%TRIGGER%</out>
</command>

<command type="script" usergroup="!admins">
<in condition="==" lvalue=%TRIGGER% rvalue=%USERVAR[16]%>*</in>
<out type="push" extdata="ip5">$ip4$</out>
<out type="push" extdata="ip4">$ip3$</out>
<out type="push" extdata="ip3">$ip2$</out>
<out type="push" extdata="ip2">$ip1$</out>
<out type="push" extdata="ip1">%IP%</out>
<out type="goto" extdata="12" condition="!=" lvalue=$ip5$ rvalue=$ip4$></out>
<out type="goto" extdata="11" condition="!=" lvalue=$ip5$ rvalue=$ip3$></out>
<out type="goto" extdata="10" condition="!=" lvalue=$ip5$ rvalue=$ip2$></out>
<out type="goto" extdata="9" condition="!=" lvalue=$ip5$ rvalue=$ip1$></out>
<out type="goto" extdata="8" condition="!=" lvalue=$ip1$ rvalue=$ip2$></out>
<out>/kick %RAWNAME% %IP%</out>
<out>/notice #c8#### #c2#Flood Control #c8#####c1# has kicked %RAWNAME% for flooding the room. #c8#Thank You!</out>
<out type="pop" extdata="ip1"></out>
<out type="pop" extdata="ip2"></out>
<out type="pop" extdata="ip3"></out>
<out type="pop" extdata="ip4"></out>
<out type="pop" extdata="ip5"></out>
<out type="break"></out>
</command> 

</config>

Now this script requires that the bot is Admined and able to see the IPs...
Also you will need a Usergroup named "admins" listing your Admins so they will be excluded from the kick...or you can erase the Usergroup="!admins" from the script and make it so it can kick anyone who floods the room...

°¹º-»ÐäZ«-º¹° · « **Reply #23 on:** July 21, 2005, 10:24:32 pm »

Quote from: GhostShip

Hmm I was just looking through the WCS tutorial

Sorry fella im hosting on MCS not WCS

Quote from: GhostShip

did the bot give a warning or just do nothing ?

Did nothin man

I have tried testin it myself n no joy aslo got others 2 try it n we had no joy.

Will the server b stopping the bot or somethin?

GhostShip · « **Reply #24 on:** July 21, 2005, 11:51:08 pm »

Humm, yes that could be a problem, and my apologies for misreading the server type Zeus.
Its our opinion that you should update to KingMacro's WCS program.
MCS was a great server but had a lot of bugs in it, as your seeing now.

The WCS is a continuation of KM's work on the MCS.
I think you'll find there are many enhancements on WCS, its one of the most stable servers that you can use.

You can download it here:
http://www.kingmacro.net/software/winmx/

Hope this helps you out

°¹º-»ÐäZ«-º¹° · « **Reply #25 on:** July 22, 2005, 10:22:26 pm »

Thanks ghost ship ill have a look in 2 WCS

Ive seen some rooms on winmx that say they r hosted on MCS but when u get in 2 the room its actualy runnin on WCS

Is this a special kinda server thats only limited 2 a few rooms or is it available 2 all?

GhostShip · « **Reply #26 on:** July 23, 2005, 03:55:32 am »

The server is free to all, KM is a generous chap, all his programs for MX are free and some of the older ones where released with the source codes for folks to learn how to program with too

If you get the WCS server you can use our tutorial and Joshs tools to help you do some of the setup.
Then I,m sure you may wish to include Galactic Overlords generous script into your Metis, no need to struggle alone

KM · « **Reply #27 on:** July 23, 2005, 11:51:49 am »

in terms of the scripts not working... did you type /bot in to the bot first? because from a clients point of view i cant think that the client would treat WCS and MCS rooms any differently - although i havent checked. But the lack of anything at all happening would indicate that perhaps you hadn't typed in /bot, so the bot cant see the text.

Gooner · « **Reply #28 on:** October 16, 2005, 05:09:10 pm »

hi iwas wondering if anyone can guide me with how i can have metis run in 2 rooms but have different sets of commands for each room??
iv looked at the mxcontrol metis forum and know its there somewhere but sadly i cannot seem to find it again lol.
Please help if u can

oh sry if this isnt the right place to ask

Anonymous · « **Reply #29 on:** October 22, 2005, 02:40:48 pm »

Can anyone help with the bot connecting since everything, it appears that the only fix they have is for if u are using the pie patch. i personnally refuse to use that patch and was wondering if anyone got theirs fixed. i am using 2.60

thanks

Maxe · « **Reply #30 on:** October 23, 2005, 12:40:10 am »

Close metis or robomx then just put the .dll in the robomx or metis folder, restart and it should work. Does for me.

EmMa · « **Reply #31 on:** October 31, 2005, 08:56:26 am »

im looking for a script for metis 2.6 to auto kick a certain tag on entry, i did have one script made but lost it all when harddrive kicked the bucket lol any help would be great also after anti flood for wsc with no safe lists so to speak

Anonymous · « **Reply #32 on:** October 31, 2005, 12:37:01 pm »

go to http://www.mxcontrol.org/modules.php?name=Forums

have a look in the metis code vault for both

[\/\//¥\\/\/]The Omega · « **Reply #33 on:** October 31, 2005, 05:15:42 pm »

My metis cant get into my room because the name is too long. Can I do something about this without changing my roomname?

nylly444 · « **Reply #34 on:** October 31, 2005, 08:12:47 pm »

Yes, just leave out everything before the underscore in the roomname

The numbers are your coded ip:port, thats all metis needs to join your room.
Without the underscore it will tell you the room name isn't valid though

[\/\//¥\\/\/]The Omega · « **Reply #35 on:** November 01, 2005, 01:59:54 am »

awsome ty soo much

~~Røçkåfë££ë® §kåñK~~ · « **Reply #36 on:** November 09, 2005, 07:23:43 am »

Is it possible to EXCLUDE a usergroup from a command?

If so how?????????

Galactic Overlord · « **Reply #37 on:** November 10, 2005, 12:09:48 am »

to exclude a certian usergroup from using a script...type as so....

<command usergroup="!usergroupname">

the "!" is called a logical not so anytime it is used it means "not" ie: != .. not equal