Author Topic: Change from DSL Modem to LAN now WinMx could not connect (Read 1786 times)

MistaDabolina · « **on:** March 06, 2008, 07:45:50 pm »

Hello
My System is an Win XP ServicPack 2 Installation.
WinMx could not receive TCP and UDP.
WinMx didnt connect to the Peer Network.

I have read every topic and tryed all the paches and all advice ...
Now I had only a new WinMx Installation v3.54 beta 4
and use a LAN ...
could someone help me ?

please
MistaDabolina

tig · « **Reply #1 on:** March 06, 2008, 11:11:15 pm »

Hi MistaDabolina

Could you please tell me what firewalls you are running?

Also have you tried forwarding your ports? If no, try http://portforward.com/routers.htm and follow the pages to winmx

Please post back and let us know how you get on.

MistaDabolina · « **Reply #2 on:** March 07, 2008, 07:44:23 pm »

Hi Tig,

these was a very hard stuff ... grmph ...

but I read it and it was very fascinating ...
I do all things that described there ...
but it did not work ?????

i controlled all the settings more than twice ... mhh

my firewall is the Win Xp SP2 firewall
i opend the Ports UDP and TCP and the Programm itselfs ...

and the yellow flash light in the connection window from WinMx blinking and flickering
the hole time ...

mmh
mmh

ok i did no reboot !?!?
should I ?

I'll try ...

first THX
very much Tig

Ciao Mista

MistaDabolina · « **Reply #3 on:** March 07, 2008, 08:24:31 pm »

Hi tig,
i reboot the system and the LAN Box ...
i checked again all settings ...
my Network is manually configured and no problems asigned ...
i go to the e-net without any problems ...
only the winMx is flashing yellow ...
;-(((

so whats next ?

tig · « **Reply #4 on:** March 08, 2008, 11:07:37 am »

Ok mate are you able to tell what other programs you are running all the time on your system? like anti-virsus etc..

And can you also please tell me if they have updated in the past few days at all?

MistaDabolina · « **Reply #5 on:** March 08, 2008, 08:01:15 pm »

Hello Tig,

your splendid

you asked the right question ...

my virusscan Kaspersky Anti Vir ... i have updated a few days ago ...
and what happens ?
they made a change for the new update ... in observing the ports ...
now no more all ports without special ports like the older version but now all ports or only your choice ...
now its completly different like the firewall from XP
its now my choice to say which port to observe or every port ...
its no good idea ...
couse now it checks only the few every normal user know ... or all ... mmh

but the good answer i can give

the yellow light in WinMx goes to green,
if I choose observe only special ports ...

do you now how many ports will now open without a check ;-?

thanks very much for your advices
and happy weekend

MistaDabolina

goes for sharing

tig · « **Reply #6 on:** March 09, 2008, 01:49:11 am »

Hay mate

You only need 2 ports for winmx. These ports are usually tcp and udp. The numbers that are normally used are 6699 and 6257. As you now have it working you will see that these ports match the ports in the router and with winmx.

And Happy Winmxing