unable to upload or collect secondaries

[fzipper]

Using winmx 3.54.4Beta
have mxmoni installed
have set port thru routerfor tcp & udp
OS is 2000pro
was working on saturday with the patch installed and a reboot
Had a power outage while was out and the system shutdown when backups ran dry. Booted system and this problem has been ongoing since, Now thursday and at wits end. Any and all assitance would be welcome
Cable system is comcast

[Me Here]

This happened to me as  well.. and was in an area that the power outage for seconds at a time was almost daily for a while..

Try this frist

Boot down the puter, and unplug the router for at least one full minute..

Then reboot everything and see what happens..

If by change the router reset itself.. which can happen in an outage then go back in and make sure your TCP, UDP and internal IPs are set correctly.

Let me know...

[fzipper]

have reloaded mx and the 2000 operating system, have installed the patch for 2000 all to no affect, ;-((

[Me Here]

Ok did you uplug the router.. if not do that and go back into and make sure of these things ...

Verify that your internal IP has not changed many routers allocate these as they power up, useally related to the socket port you use however, this is not always the case

You can find out what a machines internal IP is by doing the following, go to Start > Programs > Accessories > Command/MSDos prompt, in the box type in 'ipconfig' for getting the ip of one machine or 'ipconfig /all' to get all the IPs on that network.

Once your sure thats correct reset the ports.

Also make sure if your using your XP firewall that you have the ports forwarded there to.. sounds obvious but with updates XP likes to well.. change itself to protect you better.. lol

Let me know again