Author Topic: Where they are? S=0 (Read 1221 times)

yamakawa4000 · « **on:** July 19, 2007, 08:11:30 am »

Hi all

I have a question.
I do primary connection
It is P=10 S=0 spm=16000.
We have a lot of people of the second connection, but it is S=0 or S=1
Where they are?

Me Here · « **Reply #1 on:** July 19, 2007, 11:36:55 am »

Hi yamakawa4000

The reason those numbers are low is the protection built into the WinMXGroup patch. It blocks flooders so you will notice that number stays low, the fact is yes there are lots of secondary connectors out there and lots of primary ones too. The Mod3.0 patch your using blocks the RIAA fake file flooding companies that attack the network, they connect via secondary as well.

Its nothing to be worried about as long as your getting good search results and chat list, and your uploads are working the patch is doing as its supposed to.

yamakawa4000 · « **Reply #2 on:** July 21, 2007, 02:56:39 pm »

Thank you. Me Here

GhostShip · « **Reply #3 on:** July 21, 2007, 05:59:02 pm »

On a further note you,ll notice over time that the numbers of secondaries wll rise, as Me_here mentions when your first connected th patch has a rough ride holding back the flooding companies so genuine secondary clients joining your primary will be slowed down to a mere trickle.

yamakawa4000 · « **Reply #4 on:** July 22, 2007, 01:14:20 pm »

Thank you GhostShip
I could see many secondarys.
I tryed 24hours run .
first P=7 S=0 spm=16000
but after 24hours is was P=10 S=15 spm=25000
by Allocated Bandwidth 15kbps OUT 22.5kbps IN