Author Topic: new dsl modem (Read 2033 times)

tarl · « **on:** November 16, 2005, 09:23:34 am »

howdy
finaly got b/band and boy winmx is not happy and spat the dummy i'm running xp-pro sp1 only i now have no chat rooms no u/l or d/l
tried to set to a primary winmx wont work with or without tcp or upd
liminted broadband self set at 15000 for both throttle 300 ms
hlep anyone

Me Here · « **Reply #1 on:** November 16, 2005, 11:38:55 am »

Hi tarl,

Welcome to the forum..

Your new DSL modem probably will need to be configured to allow the ports through that WinMX uses. Basically the instructions for these are the same principal as a router.

So the first step is to have a look here for some help on getting started:

https://www.winmxworld.com/tutorials/routers_info.html

Read that through and follow the links it gives you for Portfoward.com site to do the actual forwarding.

Then let me know if you have any ?s about any of it..

tarl · « **Reply #2 on:** November 19, 2005, 12:16:47 am »

got modem rerouted and chatrooms running i can d/l myself but all others no getting timeouts need more help thanks also ajusted xp firewall too

Me Here · « **Reply #3 on:** November 19, 2005, 02:55:35 am »

Tarl,

When you set up your ports did you make sure you set a rule for UDP seperately from the TCP?

Also do you have Norton 2005 installed?
If you do go to Options > Internet Worm Protection > Control Programs there you should see a place to add WinMX to an allow list and give it Permit All Access.

tarl · « **Reply #4 on:** November 22, 2005, 02:14:17 am »

no i dont have macarfrees have kasenky lab with antihacker but removed anti as i locked up net when a hack came through
have done rerouteing reinstalle new winmx also new patch but still getting timeouts for people trying to d/l
have xp-pro sp1
seiman 4200 dsl modem rerouted
i can get chatrooms and d/l myself
so i'm really lost on this have treid all the pages relateing to thisa problem but no joy still
isp server is bigpond australia
hope this can help

Me Here · « **Reply #5 on:** November 22, 2005, 11:01:43 pm »

Okay Tarl,

The McAfee may require you to allow WinMX in order to get the uploads working. Be sure to have a look here to set that up.

http://firewalling.com/personalfirewalls/McAfeeV6.0FirewallPlus.htm

The other suspect I would look at is the XP firewall as its known to turn itself back on when you least expect it. Since you have the McAfee I dont see a need for both running.

If you do feel you need that XP Firewall up, then have a look here for instructions on it:
https://www.winmxworld.com/tutorials/firewalls-xp.html

Also be sure that the UDP port you set in the Modem matches that set in WinMX in Settings > Internet Connections > IN/OUT UDP ..

I did have one other customer of BigPond Cable with this issue but was unable to find much information on whether they may be filtering p2p.

If you try the above and it continues try using different ports, such as in the 58000 range. Remember this means two seprate numbers and re setting the rules in the Modem, firewalls, and WinMX if you change them..

Let me know how you get on..

tarl · « **Reply #6 on:** November 23, 2005, 08:52:12 am »

the problem is my server bigpond.com has a filter system to block p2p programs may to save there own profits in selling d/l of movies and music
does anyone know how to mask winmx so i can let people d/l from me?
i do thank you for all your help
now if we can find a mask life will as it should be shareing all the good stuff

Me Here · « **Reply #7 on:** November 23, 2005, 12:03:12 pm »

Tarl,
Another user posted some interesting info and I would like for you to follow this advise and tell me if it works for you.

Quote

I am a customer of an ISP (Rogers in Toronto Canada) that is widely reputed to block p2p traffic by packet inspection. I found good info in the slyck forums. They talked about cable ISPs not blocking port 1720 cuz they use it for home voip services. So, needing another port, I tried port 39 (reserved for "rlp" - Resource Location Protocol) and am happily back up and running, both uploads and downloads.

In short, I set:
IN/OUT ports to Listen on 1720 for TCP
and send and receive on port 39 for UDP.
and I was uploading and downloading for the first time in weeks.

No guarantees, but it worked for me!

tarl · « **Reply #8 on:** November 23, 2005, 12:45:28 pm »

war that just in winmx or rerouteing modem ports as well?
thank you

Me Here · « **Reply #9 on:** November 23, 2005, 12:54:34 pm »

ports have to match in winmx, router, and firewalls..

So Yes you will need to add those to your router also.

tarl · « **Reply #10 on:** November 25, 2005, 02:02:56 am »

it work many many thanks i felt real bad that i could d/l and other could not of me so thanks for your help and please thank other person too please so if any others with bigpond server come in it should work for them too
once again many thanks
tarl