Author Topic: Search is not workgin (Read 5234 times)

broker6000 · « **on:** September 04, 2014, 06:57:24 pm »

When searching I used to get thousands of results however lately there
4 or 5 on various subjects. Anyone have an idea of whats wrong
Thanks

GhostShip · « **Reply #1 on:** September 04, 2014, 07:06:33 pm »

Please read thefollowing link for further information on why WinMX is not wokring as before

https://www.winmxworld.com/tutorials/wpn_attack_information_.html

We are still doing our best to develop a new client that does not suffer from the protocol weaknesses that WinMX has built into it but it may still be some time before its as polished as WinMX is due to having a small development group.

Can I suggest using the opennap side of WinMX until we have something ready Broker

broker6000 · « **Reply #2 on:** September 04, 2014, 07:10:25 pm »

Thank you for your help most appreciated however I don't know what opennap is or how to use it

GhostShip · « **Reply #3 on:** September 04, 2014, 07:13:39 pm »

No problem there I can help with that

Follow the instructions here and if you need further help I'll be here to assist you

https://www.winmxworld.com/tutorials/opennap.html

broker6000 · « **Reply #4 on:** September 04, 2014, 07:20:22 pm »

Thanks
I have the wsx file do I just put in into program files 86

GhostShip · « **Reply #5 on:** September 04, 2014, 07:22:21 pm »

I normally place mine in the same folder as WinMX is in

GhostShip · « **Reply #6 on:** September 04, 2014, 07:24:55 pm »

PS in case you wish to still use the winmx chat system you can gather a roomlist in the following way , nip to this site and select a chat room of your choice from the list and copy and paste it into the box atop the winmx chat list and press join, that will bypass the roomlist problems we are experiencing.

http://winmxunlimited.net/tools/chat-room-list/

broker6000 · « **Reply #7 on:** September 04, 2014, 08:36:31 pm »

I added the file to the winmx folder but it still does not work
should I do something else and thanks again

GhostShip · « **Reply #8 on:** September 04, 2014, 09:04:25 pm »

You have to "import" the file into the opennap side of the WinMX client , go to the "Networks" page and look at the two large buttons across the top one marked "Openap networks" and the other "WinMX peer networks", press the one that says "Opennap networks" and the screen will change to a blank one with some buttons above, go to the button marked "Import wsx" and browse for the file you have, the blank screen should now populate with some opennap servers click on one or two of theses and then either press the button up top marked "connect" or right click and select the same, yo should now see those you have selected turn green and you can go to the search side to look for some files as normal, just below the search boxes( lower left corner) theres a little drop down box make sure it is set to search the opennap server your connected to before pressing the search button.

I think its all in here

https://www.winmxworld.com/tutorials/opennap.html

broker6000 · « **Reply #9 on:** September 15, 2014, 05:20:12 pm »

:Thanks for all the help one other thing I cannot fine the dropdown box like said below

theres a little drop down box make sure it is set to search the opennap server your connected to before pressing the search button.

broker6000 · « **Reply #10 on:** September 15, 2014, 05:27:25 pm »

Hello
Thanks for the info I have one issue I cannot find the arrow your referring to below

theres a little drop down box make sure it is set to search the opennap server your connected to before pressing the search button.