Author Topic: Not getting full channel list. (Read 1068 times)

~~Josh~~ · « **on:** May 06, 2006, 03:11:02 am »

I just got a router. The Linksys® WRT54G Wireless-G Router is what i got. I forwarded the port for winmx primary but when i try to get hte list i only get around 400 channels. Ive tried changing ports but its still the same?

GhostShip · « **Reply #1 on:** May 06, 2006, 03:13:52 am »

Port or ports Josh ?

What ports have you tried and whats your setup like, that could be a little helpful to us get you a sensible and helpful answer.

~~Josh~~ · « **Reply #2 on:** May 06, 2006, 05:15:57 am »

Well, ive used 6699 and 6257 on winmx and i get around 400 rooms. I changed it to 26699 and 26527 and forwarded them and i still only get 400

KM · « **Reply #3 on:** May 06, 2006, 11:53:27 am »

did you not say that your ISP allows you to have multiple computers online with public IP Addresses a while back? if that is the case then try disabling the NAT (or, better still, disable everything in it - especially DHCP, then plug the modem in to the hub instead of the WAN port so all computers can access the modem directly) it will save you a lot of hassle

of course if there is some need for NAT then check if it has any "firewall" options enabled that may be filtering the UDP packets, of course for any more info we'd need to know the version number of it (with any luck you got a v4 and not a 5v, because then you can do whatever you want to the thing to customise it)