Author Topic: WCS (Read 58368 times)

~~Josh~~ · « **on:** May 01, 2005, 09:19:20 pm »

Well WCS is doing good and i use it 100%. But we need to get rid of all those mcs rooms that are causing trouble!!

KM · « **Reply #1 on:** May 01, 2005, 09:21:46 pm »

I think MCS will be gone shortly...

the biggest bug fix in WCS 1.5 was blocking a certain thing... which WinMX dislikes and messes up the channel window, MCS doesn't block this so i'm sure that soon enough people will start causing problems and hosts will move to more updated servers.

~~Josh~~ · « **Reply #2 on:** May 01, 2005, 09:24:16 pm »

that thing where the text that was *Removed*? i saw that in mcs and complained to you about it a few times but then it stopted. And until WCS 1.4 i havent seen it since mcs but then i saw it and it finaly got fixed.

*Post edited by KM to remove extra details that are not needed as public knowlage!*

KM · « **Reply #3 on:** May 01, 2005, 09:43:06 pm »

it was partially blocked in previous WCS versions (i blocked it in messages but forgot usernames)

its not really a bug in the servers, but the way the text is sent to the client gives it a lot of control over the edit control that displays the text (it needs to have that control to send the raw data to it for colours etc) however unfortunately the edit control has a small bug where certain data causes it to... mess up slightly, so text is there then its gone then huge gaps appear, then the text goes back to normal, then some random lines vanish etc...

just lucky that there was a flaw in MCS that hosts would immedietly want to get rid of, now they have no choice but to upgrade to something else that blocks it

GhostShip · « **Reply #4 on:** May 08, 2005, 09:08:46 pm »

New WCS version out folks (WCS 1.5.2)

Just a few bytes of adjustment KM said

Quote

I changed 2 bytes of the source code (one byte being changing "1" to "2" in the version number, the other byte being changing a "2" to a "1" in the disconnect handler)

This should fix the problem of exit messages not being sent in 1.5.1

Cheers KM , and folks, remember that restarting your WCS will automatically update it.

GhostShip · « **Reply #5 on:** June 16, 2005, 06:52:26 pm »

Another Wcs Out folks

Version 1.60 released

http://www.kingmacro.net/software/winmx/

Look for the WCS download link on that page

Quote

WCS 1.6 has been released.

There have been a few small changes, but the biggest one I hope you dont notice! (its a major security fix)

There aren't any new features, just a few small bug fixes and one large one. I've also added a little extra support for external config editors.

Any problems with 1.6 then let me know

I hope we wont have any

, cherers KM

GhostShip · « **Reply #6 on:** June 17, 2005, 12:35:24 pm »

Newer version of the server released folks... same version number as most folks wouldnt have noticed the first one ..lol

Quote

Update: I've just re-released 1.6, its the exact same program so I wont bother changing the version number, but I havent compressed it this time - this seems to have fixed 1 or 2 of the small problems I hadn't been able to find a solution for. Unfortunately this does make the program over 100k which is a bit big, although by current standards that seems to be considered extremely small...

Uncompressing it will have the effect of not triggering some of the more cheaper anti virus programs, as often has afflicted compressed programs

KM · « **Reply #7 on:** June 17, 2005, 04:41:19 pm »

i solved the issue of that rougue antivirus program a couple of releases ago by switching to a different compressor

I was trying to solve another issue with the MOTD with the uncompressed release, i didn't bother changing the number because its the same release, but i had a theory that the compression might have been messing up the memory allocation - one that may have been incorrect

During testing i was never able to get it to do it, yet when i released people kept saying it was happening - and using the releases i could make it happen, so i made the assumption that compressing it for release was causing it... now, i really am confused

GhostShip · « **Reply #8 on:** June 20, 2005, 12:44:37 am »

This was posted on Km,s site

Quote

And due to the large number of emails, I'll say this here, please could you try shortening your MOTD if you are having problems. There are ongoing issues with extremely long MOTDs in WCS. If you still have problems with a shorter MOTD then let me know

Well I suppose that means folks will have to make the MOTD smaller, although why anyone would want multiple lines of text as someone enters I dont know, maybe a whole set of rules or something ?, could always use a bot to do the same thing.

GhostShip · « **Reply #9 on:** June 28, 2005, 12:49:42 am »

I spotted this earlier folks
Available from the usual place (look for WCS )

http://www.kingmacro.net/software/winmx/

Quote

Small update to WCS (1.6.1) released

A few people reported small issues with channel listings in WCS 1.6, this was because the channel names were too long - so it was blocking the listings, i've just released a small update that will trim the end off of the name instead of blocking the listing.

Well done KM for sorting that small issue out

(PS: When are you going to update the download ? )

GhostShip · « **Reply #10 on:** August 16, 2005, 07:33:10 pm »

New release folks

http://www.kingmacro.net/software/winmx/

Quote

I've released an update to WCS, I think that makes it version 1.7

Changes:

A few small "security" tweaks with usernames, nothing major but a few people were being an annoyance.
Added a /who command (S s and I Access required, you'll see why those 3 access levels when you use it).
Mode a small modification to the entry message for admins (Made the IP Address a different colour to make it easier to read).
And of course a few other backend changes that nobody would really care about.

Well Done and Cheers KM

ELEphatman · « **Reply #11 on:** August 23, 2005, 03:58:25 pm »

hey km was thinking maybe you could fix it where we could set up exile room in config so we could redirect user faster cause some have time to flood like crazy b4 you exile

& +

/notice dont work if we use it in replace, can you fix tht to plz

thnx

GhostShip · « **Reply #12 on:** August 25, 2005, 10:09:51 pm »

Seems Km has been tweaking his WCS server again folks

http://www.kingmacro.net/software/winmx/

Quote

Latest News

I've released a small WCS Bug Fix, that makes it version 1.7.1

Changes:
Added a FancyEntry= option (set to 0 to disable the coloured IP Address on entry)
Added /who to the /help list and fixed a small typo in the /help list that has been there since 1.0 (oops...)
Fixed a potential security bug
Fixed a small bug in the GUI

One day soon you,ll have nothing left to fix

cheers KM

ELEphatman · « **Reply #13 on:** August 26, 2005, 09:21:17 pm »

KM you know we want the exile setting in config
& we need access setting back plz!!

°¹º-»ÐäZ«-º¹° · « **Reply #14 on:** August 29, 2005, 08:37:54 am »

Hi im having some trouble with this server 2

I aint able 2 get rabbit, robo or share guard in 2 the room

any ideas

thanks

KM · « **Reply #15 on:** August 29, 2005, 02:26:24 pm »

are you using the loopback address to enter?

°¹º-»ÐäZ«-º¹° · « **Reply #16 on:** August 29, 2005, 09:03:46 pm »

Loop back addy?

ELEphatman · « **Reply #17 on:** August 29, 2005, 11:09:53 pm »

try to open wcs in higher port other then 3 maybe try 1125
shareguard dont like port 3 so maybe others dont either

& for loopback
go here

https://www.winmxworld.com/tutorials/loopback.html