Author Topic: FX Chat Server (Read 57065 times)

Galactic Overlord · « **Reply #40 on:** October 08, 2005, 11:19:12 pm »

Oops...make that 1.30 C D E...lol

GhostShip · « **Reply #41 on:** October 09, 2005, 03:34:42 am »

I have the others just not the E version and I,ll be uploading them tomorrow Galactic

As you may have read the site has moved hosts so access arrangements are still being sorted out but I have quite a few items to catch up on.

If you would be kind enought to send it to me at the address I will PM you, I would be most grateful.

willscotn · « **Reply #42 on:** October 09, 2005, 08:34:57 am »

have 1.3.0e here

GhostShip · « **Reply #43 on:** October 11, 2005, 02:47:03 am »

Thanks Willscotn, but Galactic has provided the missing release, thanx to him for his generosity

Thank you all in fact, without good folks like you the forum would be an empty place indeed.

GhostShip · « **Reply #44 on:** October 28, 2005, 06:17:33 pm »

Hmm Fedez has been busy again

http://fxserver.p2pzone.net/

Quote

v1.3.2
Many bug fixes. Added admin/agent messages setup in the config file too (ex: /setAdvOption Get@Msg=$NAME$ is now an Admin), see the example config file attached to the server on the download page. Added /ShowRoom command. Add /ShowRoom 1 to your config file to make the server connect to the wpn on startup,/ShowRoom 0 otherwise. All the Admins (access A) can use this command.
Now "/setuserlevel <username> reset" should work (to reset one's access level to default).
Little update to the helplevel page fixing some mistakes :p

Hmm very nice lot of fixes and tweaks, cheers Fedez

/¥\âx · « **Reply #45 on:** November 16, 2005, 10:13:39 am »

I tried fxs and have been running it for about 3 weeks now, i actually prefer it to wcs, it does look the same as wcs but there is just something i like about it and im staying on fxs now. thx Fedez, good program

GhostShip · « **Reply #46 on:** December 07, 2005, 03:06:07 am »

In the nick of time a solution arrives

http://fxserver.p2pzone.net/

Quote

v 1.3.4
Hopefully fixed some of the problems of v1.3.3
Restored the Reload command in the main window.
/viewtopic available for all users, simply shows the current channel topic.
Updated to the piepatch 2.8 (still this works when the patch is not installed on your pc)

This should fix the last problem I hope (Error 12 ), cheers Fedez

GhostShip · « **Reply #47 on:** December 14, 2005, 01:33:12 am »

Hold tight folks another new version has arrived

http://fxserver.p2pzone.net/

Quote

v.1.3.5

Fixed the bug of the colours when the timestamps were disabled.
The log file is now created one time per day.
Minor bugs.. (/forcelogin...)

Merry Xmas Fedez and thanks for all your great work this year, and of course cheers for this latest release

Galactic Overlord · « **Reply #48 on:** December 17, 2005, 03:28:20 am »

Warning 1.3.5 has bug in logging sectiion....

Unable to open Log file....results in Server shutdown.....

Turn off logging if you are about to update to new version....
If still using 1.3.4 dont update...

Message has been posted in FXServ Forum for Fede's Info also...

GhostShip · « **Reply #49 on:** December 17, 2005, 04:19:06 am »

Cheers Galactic

I expect Fedez was in a rush to fix the previous problems maybe he should get some beta testers ?

Merry Xmas G.O

GhostShip · « **Reply #50 on:** January 31, 2006, 11:49:06 pm »

I know Fedez has been working on the server for a few weeks fixing many bugs etc, so it will be interesting to see how its running

http://fxserver.p2pzone.net/

Quote

v.1.3.6

Fixed the log bug.
/SetAdvOption SplitLog=0 to disable the log splitting if you want.
/SetAdvOption LogLimit=<n> to limit the log window backscroll to n thousands of characters. (Ex: LogLimit=20 will limit to 20.000 characters)
Co-Host level added. This level is the most powerful possible, Co-Host users will be able to use every command, so please be careful assigning this level, and use a clever password, not the name of your mum! The best would be for istance "aktydq3512" or something like that.
In the config file the Addpassword command for this level would be /addpassword aktydq3512=Co-Host=n where n is the corresponding textformat number, as usual.
The command to promote someone to Co-Host is /SetCohost <username>.
As requested by some people, I have limited the number of attempts for the /login command
/channelname reload will now get the public ip and the channelname again.
Added /reload and /savecfg commands. To reload and save the config file, of course.
/message now supports multiline messages. Use \n or #NEWLINE# as usual.

Cheers Fedez

GhostShip · « **Reply #51 on:** February 04, 2006, 01:21:16 am »

Another update folks

http://fxserver.p2pzone.net/

Quote

v.1.3.7

Fixed some bugs of version 1.3.6
/login commands now are visible to Co-Hosts user
I forgot to say that from version 1.3.6 the /banip command allows also to ban range of IPs. Use for example /banip 82.83.84.* or /banip 82.83.*.*

Cheers once again Fedez

Anonymous · « **Reply #52 on:** February 19, 2006, 05:24:00 pm »

Hey im having trouble making my (FX) room visible in the WPN chat list... any ideas?

also, (possible dumb question), is it possible to set a login to cohost level, if so, how...

thanx!

Anonymous · « **Reply #53 on:** February 19, 2006, 07:26:10 pm »

me again...

turns out it is visible...just not to me in my list lol

willscotn · « **Reply #54 on:** February 19, 2006, 08:32:34 pm »

/addpasswordaktydq3512=Co-Host
like so

Anonymous · « **Reply #55 on:** February 19, 2006, 09:44:03 pm »

thanx

Anonymous · « **Reply #56 on:** February 20, 2006, 01:13:50 pm »

Hi, does anyone know where/if there is a published source code for fx server?

if so where?

Me Here · « **Reply #57 on:** February 20, 2006, 02:32:46 pm »

FX Server is not open source, infact to my knowledge at this time ROSE or RoboServer is the only fully functional Chat Server.

Anonymous · « **Reply #58 on:** February 21, 2006, 02:51:13 am »

another minor problem, when some members login they see this:
"Format number not valid"
the login still works they are getting the right format and access though...
can anyone tell me what is causing this please?

thanx in advance:D

willscotn · « **Reply #59 on:** February 21, 2006, 10:06:42 am »

/TextFormat 1=#c2#<$NAME$#c2#> #c1#$TEXT$
/TextFormat 2=#c6#<#c2#$NAME$#c6#> #c1#$TEXT$
/TextFormat 3=#c7#<#c2#$NAME$#c7#> #c1#$TEXT$
/TextFormat 4=#c2#$NAME$ #c1#$TEXT$

/DefaultFormat User=1
/DefaultFormat +=2
/DefaultFormat Admin=3

so users that enter room get txt format 1
and so on for agent have diff txt format
and admin also have diff format
if number is not set as txt format maybe why get error message
these four are set in config as normal

Author Topic: FX Chat Server (Read 57065 times)

Galactic Overlord

/¥\âx

Galactic Overlord

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous